Thank you
Our team of industry domain experts combined with our guaranteed SLAs, our world class technology .
Get Immediate Help
A credible VAPT report holds nine sections, and two markers separate a good one from a weak one: the quality of its evidence and the specificity of its remediation guidance. A finding a developer can reproduce from the report alone, paired with a fix that names the change, where it applies and who owns it, shows real manual work. This guide helps UAE buyers judge a report, or a proposal's promise of one, before accepting it.
Checking a report against these points takes under an hour and can save weeks of rework.
This guide supplies that reference point. It walks through each section a credible report contains, what weak versions look like, how risk ratings should be presented, and what to do when a delivered report falls short. Our VAPT services guide covers how the engagement itself is scoped and priced, so this page concentrates on the document you receive at the end.
You see, the report is also the part of the engagement you can judge most objectively. Testing happens out of sight, and yet a report exposes the quality of that work through its evidence, its reasoning and its specificity. A buyer comparing proposals can apply the same standards to ask what the deliverable will look like, and our list of penetration testing companies in the UAE is a useful starting point for building that shortlist.
| Section | What it must contain | What a weak version looks like |
| Executive summary | It states overall risk in business terms, names the most important findings and says what leadership should decide or fund. | It repeats technical jargon, lists vulnerability counts with no context, or reads as a generic paragraph that could describe any organisation. |
| Scope and methodology statement | It names the systems, environments, dates and tester roles covered, the methodology followed and anything excluded or untestable. | It says only that a test took place, so nobody can tell what was and was not examined. |
| Findings summary and risk distribution | It counts findings by severity, lists the highest risks and shows where weaknesses cluster. | It shows a chart of severities with no explanation of which findings matter or why. |
| Detailed findings | Each finding has a title, affected asset, description, rating with rationale and a clear explanation of the weakness. | Findings are copied from a scanner database and describe a vulnerability class without saying how it applies to this system. |
| Evidence and reproduction steps | Each finding carries proof, such as annotated requests and responses and numbered steps a developer can follow unaided. | A finding is asserted with one screenshot or none, so the reader must trust the tester without being able to check. |
| Business impact assessment | It explains what an attacker could reach or change through each major finding, in terms of data, money, operations or compliance. | It repeats the severity label and adds a generic sentence about attackers stealing data. |
| Remediation guidance | Each finding has a specific fix that names what to change, where, and how to confirm the change worked. | The same advice, such as apply input validation, appears under many unrelated findings. |
| Retest results | It records which findings were retested, when, by whom and whether each is now closed, partly fixed or still open. | It says retesting is available without including any results, or marks everything closed with no evidence. |
| Appendices and raw output | They hold supporting material such as request logs, the asset list and the testing timeline, organised so a reader can find what a finding references. | They hold an unfiltered scanner export that is presented as the findings. |
A missing section worries a careful buyer less than a present but hollow one, because an absent section is easy to request while a hollow one looks like compliance with the brief. Findings that cite CVE identifiers should also explain how each identifier applies to the tested system, and our guide to common vulnerabilities and exposures explains how those identifiers work. Treat the weak column of the table as a checklist when reading a draft.
That is why the executive summary and the technical findings must be separate, self-contained parts. An executive summary stuffed with technical identifiers loses the board in the first paragraph, and technical findings written in summary language leave engineers guessing. Boards increasingly expect exposure in financial terms, and our guide to cyber risk quantification explains how a technical finding can be translated into that language.
A useful test is to hand each section to its intended reader and ask one question. Can the board member say what to decide after two minutes, and can the engineer start fixing without a call? A report that collapses both audiences into one narrative tends to fail both, since the board skims the detail and the engineers cannot find it. Practical reports also keep a short summary table up front so that either reader can navigate to what they need.
A developer should be able to reproduce any finding from the report alone, without contacting the tester, and that is the test worth applying to every entry. Reproducibility also matters for retesting, since the person verifying a fix needs the same steps. For application and API work, our guide to web application and API penetration testing explains what evidence those engagements should produce.
That labelling matters because a Base score describes the intrinsic severity of a weakness and says nothing about your environment. FIRST's specification recommends supplementing it with Threat metrics, which reflect the state of exploitation at a given time, and Environmental metrics, which reflect your own controls and the importance of the affected system. A report that presents bare Base scores with no rationale can mislead in both directions, overstating a flaw that sits behind strong controls and understating one that guards sensitive data.
Two findings with the same score can therefore carry very different urgency. An administrative interface exposed to the internet with a default password is far more pressing than the same weakness reachable only from an isolated management network, even when the raw scores match. A credible report gives a contextual business risk rating alongside the score and explains the reasoning, so the reader can see why one finding ranks above another. Ask providers which version they use, whether their scores are Base only, and how they turn scores into priorities for your environment.
Generic advice such as apply input validation or keep software up to date is the clearest sign that a report was not written for the organisation that commissioned it. Lines like that are written once and pasted under many findings, which leaves engineers to do the analysis the report should have done. A verification method also makes follow-up checks easier, and our vulnerability assessment service is one route for confirming fixes between full retests.
If a delivered report shows several of these markers, the sensible first step is to request a walkthrough call before escalating, because a conversation often reveals whether the work took place and was poorly written up or never happened. Keep the discussion factual and ask the tester to demonstrate two or three findings live. Understanding how scanning, testing and red teaming differ helps frame that conversation, and our guide to VAPT, vulnerability assessment and red teaming sets out the differences. Record the outcome in writing for your procurement file.
Schedule the retest while the engagement is fresh, and agree in advance how much time the provider needs after remediation. Keep the final report and the retest results together, since auditors, insurers and enterprise customers often ask to see evidence of both. When others need assurance, share a redacted version or an executive summary rather than the full document, after agreeing confidentiality terms with the provider.
Outcomes depend on how quickly teams act on findings, and a report can only help reduce risk when someone owns the fixes. Our enterprise penetration testing guide covers scope, cost and provider selection across the wider testing programme this report belongs to.
Don’t Let Cyber Attacks Ruin Your Business
Call
UK: +44 (0)20 3336 7200
KSA: +966 1351 81844
UAE: +971 454 01252
Contents
To keep up with innovation in IT & OT security, subscribe to our newsletter
Recent Posts
Cloud Security | 07/10/2026
Cloud Security | 07/10/2026
Cyber Threats | 07/10/2026
What should a VAPT report include?
Nine areas: executive summary, scope, findings summary, detailed findings, evidence, impact, remediation, retest results and appendices.How long should a VAPT report be?
Length follows scope. A short report is fine if every finding has evidence, impact and a specific fix.Is a scanner output a penetration testing report?
No. Scanner output lists known issues without exploitation or context. See our vulnerability assessment guide.What is CVSS and how is it used in reports?
FIRST's severity scoring system, now at v4.0. Reports should state the version and whether scores include Threat and Environmental metrics.Should a VAPT report include a retest?
A retest section should show which findings were fixed. Confirm it is included. See our VAPT services guide.Can we share a VAPT report with clients or auditors?
Often yes, ideally as a redacted copy or executive summary, once confidentiality terms are agreed with the provider.How quickly should we receive the report after testing?
Often several working days after testing ends. Hours on a broad scope suggests scanner output. See our enterprise penetration testing guide.